Omnidirectional iridescence via cylindrically-polarized femtosecond laser processing

Nikolaos Livakas; Evangelos Skoulas; Emmanuel Stratakis

doi:10.29026/oea.2020.190035

Article navigation > Opto-Electronic Advances > 2020 Vol. 3 > No. 5 > 190035

Next Article Previous Article

Livakas N, Skoulas E, Stratakis E. Omnidirectional iridescence via cylindrically-polarized femtosecond laser processing. Opto-Electron Adv 3, 190035 (2020). doi: 10.29026/oea.2020.190035

Citation:

Livakas N, Skoulas E, Stratakis E. Omnidirectional iridescence via cylindrically-polarized femtosecond laser processing. Opto-Electron Adv 3, 190035 (2020). doi: 10.29026/oea.2020.190035

Original Article Open Access

Omnidirectional iridescence via cylindrically-polarized femtosecond laser processing

1.
Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, Heraklion Crete 71110, Greece
2.
Department of Materials Science and Technology, University of Crete, Heraklion Crete 71003, Greece
3.
Department of Physics, University of Crete, Heraklion Crete 71003, Greece

More Information

Corresponding author: E Stratakis, E-mail: stratak@iesl.forth.gr

Received Date 16 September 2019

Accepted Date 26 November 2019

Available Online 21 May 2020

Published Date 21 May 2020

Abstract

Abstract

We report the femtosecond (fs) laser fabrication of biomimetic omnidirectional iridescent metallic surfaces exhibiting efficient diffraction for practically any angle of light incidence. Such diffractive behavior is realized by means of multi-directional low-spatial-frequency, laser-induced periodic surface structures (LSFL) formed upon exploiting the cylindrical symmetry of a cylindrical vector (CV) fs field. We particularly demonstrate that the multi-directional gratings formed on stainless steel surface by a radially polarized fs beam, could mimic the omnidirectional structural coloration properties found in some natural species. Accordingly, the fabricated grating structures can spatially disperse the incident light into individual wavelength with high efficiency, exhibiting structural iridescence at all viewing angles. Analytical calculations using the grating equation reproduced the characteristic variation of the vivid colors observed as a function of incident angle. We envisage that our results will significantly contribute to the development of new photonic and light sensing devices.
- laser processing /
- structural colors /
- radial polarisation

FullText(HTML)

References

[1]	Dumanli A G, Savin T. Recent advances in the biomimicry of structural colours. Chem Soc Rev 45, 6698-6724 (2016). doi: 10.1039/C6CS00129G CrossRef Google Scholar
[2]	Kumar C S S R. Biomimetic and Bioinspired Nanomaterials (Wiley, Weinheim, 2010). Google Scholar
[3]	lida M, Hagiwara K, Asakura H. Holographic fourier diffraction gratings with a high diffraction efficiency optimized for optical communication systems. Appl Opt 31, 3015-3019 (1992). doi: 10.1364/AO.31.003015 CrossRef Google Scholar
[4]	Loewen E G, Popov E. Diffraction Gratings and Applications (M. Dekker, New York, 1997). Google Scholar
[5]	Rößler F, Kunze T, Lasagni A F. Fabrication of diffraction based security elements using direct laser interference patterning. Opt Express 25, 22959-22970 (2017). doi: 10.1364/OE.25.022959 CrossRef Google Scholar
[6]	Mahalik N P, Micromanufacturing and nanotechnology. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. Google Scholar
[7]	Singh S. Diffraction gratings: aberrations and applications. Opt Laser Technol 31, 195-218 (1999). doi: 10.1016/S0030-3992(99)00019-5 CrossRef Google Scholar
[8]	Saito A, Miyamura Y, Nakajima M, Ishikawa Y Sogo K et al. Reproduction of the Morpho blue by nanocasting lithography. J Vac Sci Technol B 24, 3248-3251 (2006). doi: 10.1116/1.2395950 CrossRef Google Scholar
[9]	Watanabe K, Hoshino T, Kanda K, Haruyama Y, Matsui S. Brilliant blue observation from a Morpho-butterfly-scale quasi-structure. Jpn J Appl Phys 44, L48-L50 (2005). Google Scholar
[10]	Dusser B, Sagan Z, Soder H, Faure N, Colombier J P et al. Controlled nanostructrures formation by ultra fast laser pulses for color marking. Opt Express 18, 2913-2924 (2010). doi: 10.1364/OE.18.002913 CrossRef Google Scholar
[11]	Tamamura Y, Miyaji G. Structural coloration of a stainless steel surface with homogeneous nanograting formed by femtosecond laser ablation. Opt Mater Express 9, 2902-2909 (2019). doi: 10.1364/OME.9.002902 CrossRef Google Scholar
[12]	Voisiat B, Wang W, Holzhey M, Lasagni A F. Improving the homogeneity of diffraction based colours by fabricating periodic patterns with gradient spatial period using Direct Laser Interference Patterning. Sci Rep 9, 7801 (2019). doi: 10.1038/s41598-019-44212-4 CrossRef Google Scholar
[13]	Birnbaum M. Semiconductor surface damage produced by Ruby lasers. J Appl Phys 36, 3688-3689 (1965). doi: 10.1063/1.1703071 CrossRef Google Scholar
[14]	Clark S E, Emmony D C. Ultraviolet-laser-induced periodic surface structures. Phys Rev B 40, 2031-2041 (1989). doi: 10.1103/PhysRevB.40.2031 CrossRef Google Scholar
[15]	Fauchet P M, Siegman A E. Surface ripples on silicon and gallium arsenide under picosecond laser illumination. Appl Phys Lett 40, 824-826 (1982). doi: 10.1063/1.93274 CrossRef Google Scholar
[16]	Vorobyev A Y, Guo C L. Direct femtosecond laser surface nano/microstructuring and its applications. Laser Photonics Rev 7, 385-407 (2013). doi: 10.1002/lpor.201200017 CrossRef Google Scholar
[17]	Papadopoulos A, Skoulas E, Mimidis A, Perrakis G, Kenanakis G et al. Biomimetic Omnidirectional Antireflective Glass via Direct Ultrafast Laser Nanostructuring. Adv. Mater 31, 1901123 (2019). Google Scholar
[18]	Tsibidis G D, Fotakis C, Stratakis E. From ripples to spikes: a hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures. Phys Rev B 92, 041405(R) (2015). doi: 10.1103/PhysRevB.92.041405 CrossRef Google Scholar
[19]	Rudenko A, Colombier J P, Itina T E. From random inhomogeneities to periodic nanostructures induced in bulk silica by ultrashort laser. Phys Rev B 93, 075427 (2016). doi: 10.1103/PhysRevB.93.075427 CrossRef Google Scholar
[20]	Wang L, Xu B B, Cao X W, Li Q K, Tian W J et al. Competition between subwavelength and deep-subwavelength structures ablated by ultrashort laser pulses. Optica 4, 637-642 (2017). doi: 10.1364/OPTICA.4.000637 CrossRef Google Scholar
[21]	Bonse J, Höhm S, Kirner S V, Rosenfeld A, Krüger J. Laser-induced periodic surface structures—A scientific evergreen. IEEE J Sel Top Quant Electron 23, 9000615 (2017). Google Scholar
[22]	Öktem B, Pavlov I, Ilday S, Kalaycıoğlu H, Rybak A et al. Nonlinear laser lithography for indefinitely large-area nanostructuring with femtosecond pulses. Nat Photonics 7, 897-901 (2013). doi: 10.1038/nphoton.2013.272 CrossRef Google Scholar
[23]	Jin Y, Allegre O J, Perrie W, Abrams K, Ouyang J et al. Dynamic modulation of spatially structured polarization fields for real-time control of ultrafast laser-material interactions. Opt Express 21, 25333-25353 (2013). doi: 10.1364/OE.21.025333 CrossRef Google Scholar
[24]	Li G Q, Li J W, Hu Y L, Zhang C C, Li X H et al. Realization of diverse displays for multiple color patterns on metal surfaces. Appl Surf Sci 316, 451-455 (2014). doi: 10.1016/j.apsusc.2014.08.030 CrossRef Google Scholar
[25]	Skoulas E, Manousaki A, Fotakis C, Stratakis E. Biomimetic surface structuring using cylindrical vector femtosecond laser beams. Sci Rep 7, 45114 (2017). doi: 10.1038/srep45114 CrossRef Google Scholar
[26]	Chichkov B N, Momma C, Nolte S, von Alvensleben F, Tünnermann A. Femtosecond, picosecond and nanosecond laser ablation of solids. Appl Phys A 63, 109-115 (1996). doi: 10.1007/BF01567637 CrossRef Google Scholar
[27]	Vorobyev A Y, Guo C L. Colorizing metals with femtosecond laser pulses. Appl Phys Lett 92, 041914 (2008). doi: 10.1063/1.2834902 CrossRef Google Scholar
[28]	Vorobyev A Y, Guo C L. Spectral and polarization responses of femtosecond laser-induced periodic surface structures on metals. J Appl Phys 103, 043513 (2008). doi: 10.1063/1.2842403 CrossRef Google Scholar
[29]	Li G Q, Li J W, Yang L, Li X H, Hu Y L et al. Evolution of aluminum surface irradiated by femtosecond laser pulses with different pulse overlaps. Appl Surf Sci 276, 203-209 (2013). doi: 10.1016/j.apsusc.2013.03.067 CrossRef Google Scholar
[30]	Ionin A A, Kudryashov S I, Makarov S V, Seleznev L V, Sinitsyn D V et al. Femtosecond laser color marking of metal and semiconductor surfaces. Appl Phys A 107, 301-305 (2012). Google Scholar
[31]	Ahsan M S, Ahmed F, Kim Y G, Lee M S, Jun M B G. Colorizing stainless steel surface by femtosecond laser induced micro/nano-structures. Appl Surf Sci 257, 7771-7777 (2011). doi: 10.1016/j.apsusc.2011.04.027 CrossRef Google Scholar
[32]	Gnilitskyi I, Derrien T J Y, Levy Y, Bulgakova N M, Mocek T, Orazi L. High-speed manufacturing of highly regular femtosecond laser-induced periodic surface structures: physical origin of regularity. Sci Rep 7, 8485 (2017). doi: 10.1038/s41598-017-08788-z CrossRef Google Scholar
[33]	Wang L, Chen Q D, Cao X W, Buividas R, Wang X W et al. Plasmonic nano-printing: large-area nanoscale energy deposition for efficient surface texturing. Light: Sci Appl 6, e17112 (2017). doi: 10.1038/lsa.2017.112 CrossRef Google Scholar
[34]	Højlund-Nielsen E, Weirich J, Nørregaard J, Garnaes J, Mortensen N A et al. Angle-independent structural colors of silicon. J Nanophotonics 8, 083988 (2014). doi: 10.1117/1.JNP.8.083988 CrossRef Google Scholar
[35]	Yetisen A K, Butt H, Mikulchyk T, Ahmed R, Montelongo Y et al. Color-selective 2.5D holograms on large-area flexible substrates for sensing and multilevel security. Adv Opt Mater 4, 1589-1600 (2016). doi: 10.1002/adom.201600162 CrossRef Google Scholar
[36]	Yao J W, Zhang C Y, Liu H Y, Dai Q F, Wu L J et al. Selective appearance of several laser-induced periodic surface structure patterns on a metal surface using structural colors produced by femtosecond laser pulses. Appl Surf Sci 258, 7625-7632 (2012). doi: 10.1016/j.apsusc.2012.04.105 CrossRef Google Scholar
[37]	Jwad T, Penchev P, Nasrollahi V, Dimov S. Laser induced ripples' gratings with angular periodicity for fabrication of diffraction holograms. Appl Surf Sci 453, 449-456 (2018). doi: 10.1016/j.apsusc.2018.04.277 CrossRef Google Scholar
[38]	Romano J M, Garcia-Giron A, Penchev P, Dimov S. Triangular laser-induced submicron textures for functionalising stainless steel surfaces. Appl Surf Sci 440, 162-169 (2018). doi: 10.1016/j.apsusc.2018.01.086 CrossRef Google Scholar
[39]	Torres R, Kaempfe T, Delaigue M, Parriaux O, Hönninger C et al. Influence of laser beam polarization on laser micro-machining of molybdenum. JLMN-J Laser Micro/Nanoeng 8, 188-191 (2013). doi: 10.2961/jlmn.2013.03.0001 CrossRef Google Scholar
[40]	Beresna M, Gecevičius M, Kazansky P G, Gertus T. Radially polarized optical vortex converter created by femtosecond laser nanostructuring of glass. Appl Phys Lett 98, 201101 (2011). doi: 10.1063/1.3590716 CrossRef Google Scholar
[41]	Nivas J J J, He S T, Rubano A, Vecchione A, Paparo D et al. Direct femtosecond laser surface structuring with optical vortex beams generated by a q-plate. Sci Rep 5, 17929 (2015). doi: 10.1038/srep17929 CrossRef Google Scholar
[42]	Nivas J J J, He S T, Song Z M, Rubano A, Vecchione A et al. Femtosecond laser surface structuring of silicon with Gaussian and optical vortex beams. Appl Surf Sci 418, 565-571 (2017). doi: 10.1016/j.apsusc.2016.10.162 CrossRef Google Scholar
[43]	Tsibidis G D, Skoulas E, Stratakis E. Ripple formation on nickel irradiated with radially polarized femtosecond beams. Opt Lett 40, 5172-5175 (2015). doi: 10.1364/OL.40.005172 CrossRef Google Scholar
[44]	Hecht E. Optics 4th ed (Addison-Wesley, San Francisco, 2001). Google Scholar
[45]	Palmer C. Diffraction Grating Handbook 6th ed (Newport Corporation, Rochester, NY, 2005). Google Scholar