In the image-based tip-tilt mirror control system, the closed-loop performance and bandwidth of the system and are limited due to the influence of sensor sampling frequency and system delay. Under the condition of limited bandwidth, this paper proposes to use linear encoder to measure the position, and get the rate signal by differ-ence. The position-rate feedback control based on the image sensor system is realized to improve the error sup-pression ability of the tip-tilt mirror control system. Because of the addition of rate feedback, the control system has differential characteristics. When the rate feedback closed-loop is completed, the image position loop has integral characteristic. At this time, a PI controller is used to stabilize the system, which makes the system rise from zero type to two type system, and improves the error suppression ability of the system. Simulation and experiment show that this method can effectively improve the closed-loop performance of the tracking control system in low frequency domain.
Position-rate control for the time delay control system of tip-tilt mirror
First published at:Dec 22, 2020
 Cochran R W, Vassar R H. Fast-steering mirrors in optical control systems[J]. Proceedings of SPIE, 1990, 1303: 245–251.
 Huang L H, Fan M W, Zhou R, et al. System identification and control for large aperture fast-steering mirror driven by PZT[J]. Opto-Electronic Engineering, 2018, 45(3): 170704.
黄林海, 凡木文, 周睿, 等. 大口径压电倾斜镜模型辨识与控制[J]. 光电工程, 2018, 45(3): 170704.
 Jiang W H. Overview of adaptive optics development[J]. Opto-Electronic Engineering, 2018, 45(3): 170489.
姜文汉. 自适应光学发展综述[J]. 光电工程, 2018, 45(3): 170489.
 Gaffard J P, Boyer C. Adaptive optics: effect of sampling rate and time lags on the closed-loop bandwidth[J]. Proceedings of SPIE, 1990, 1237: 376–393.
 Dessenne C, Madec P Y, Rabaud D, et al. First sky tests of adaptive optics predictive control[J]. Optoelectronics Letters, 2008, 4: 407–409.
 Southwood D M. CCD-based optical tracking loop design trades[J]. Proceedings of SPIE, 1992, 1635: 286–299.
 Busch T E, Skormin V A. Experimental implementation of model-reference-control for ?ne-tracking mirrors[J]. Proceedings of SPIE, 1997, 2990: 183–189.
 Ren W, Luo Y, He Q N, et al. Stabilization control of electro-optical tracking system with fiber-optic gyroscope based on modified smith predictor control scheme[J]. IEEE Sensors Journal, 2018, 18(19): 8172–8178.
 Tian J, Deng C, Cao Z, et al. Application of acceleration feedback techniques on inertial stabilization platform[J]. Opto-Electronic Engineering, 2016, 43(12): 40–45.
田竞, 邓超, 曹政, 等. 加速度反馈技术在惯性稳定平台中的应用[J]. 光电工程, 2016, 43(12): 40–45.
 Mao Y, Ren W, Luo Y, et al. Optimal design based on closed-loop fusion for velocity bandwidth expansion of optical target tracking system[J]. Sensors, 2019, 19(1): 133.
 RESOLUTE? absolute optical encoder with BiSS serial communications[EB/OL]. London: England. (2019-12-06)[2019-12- 06]. https://www.renishaw.com/en/resolute-downloads--37856.
 Deng J. The practical application of STM32 encoder in grating speed measurement[J]. Information Technology, 2013(8): 53.
邓军. STM32编码器在光栅尺测速场合的实际应用[J]. 信息技术, 2013(8): 53.
 Liu H L, Cui J M, Cao C Y. Application of raster ruler to detecting speed and position in the permanent magnet linear synchronous motor[J]. Electrical Engineering, 2009(12): 26–28, 40.
刘红丽, 崔建明, 曹春岩. 光栅尺在永磁直线同步电动机测速测位移中的应用[J]. 电气技术, 2009(12): 26–28, 40.
Youth Innovation Promotion Association, Chinese Academy of Sciences
Get Citation: Ruan Yong, Xu Tianrong, Yang Tao, et al. Position-rate control for the time delay control system of tip-tilt mirror[J]. Opto-Electronic Engineering, 2020, 47(12): 200006.
Previous: Automatic 3D vertebrae CT image active contour segmentation method based on weighted random forest